Military Energetics

Innovation, excellence, and client retention are at the heart of the company’s ethos.

It is our quality, attention to detail and level of service that enables us to stand out from other suppliers and remain at the forefront of the industry.

TECHNICAL DATA SHEET – TNT EXPLOSIVE

No.	Technical Specification	Range Requirements
1	Outer appearance:	cast charges or flakes
2	Color:	Yellow (light yellow to dark yellow)
3	Solidification point,% not less than	80.2
4	Moisture and volatile substances, % not more than	0.1
5	Acidity as per sulfuric acid, % not more than	0.01
6	Insoluble matters in acetone (or benzene/ toluene) % not more than	0.05
7	Sodium, not more than %	0.001
8	Shelf life	min 20 years
TNT flakes
9	Thickness of flake, average: max, mm	0.635
10	Thickness of flake max: max, mm	1.016
TNT cast charges (booster)
11	TNT weight per each cast charge (booster), g	400
12	Specific weight, g/cm³	1.35 ÷ 1.61
13	Average diameter, mm	90 ÷ 120
14	Average thickness, mm	30 ÷ 40

C4-E TECHNICAL DATA SHEET

No	Description	Unit	Specification
1	Outer appearance	–	Semi-cylindrical block of explosive, with a circular groove in the center, uniform in color ranging from white to yellow.
2	Dimension
2.1	Outer diameter of the explosive charge	mm	80 ± 2
2.2	Inner diameter of the explosive charge	mm	22 ± 1
2.3	Height of the explosive charge	mm	135 ± 3
3	Mass	g	500 ± 25
4	Moisture content and volatile substances, not more than	%	0.5
5	Density	g/cm³	1.45 ÷ 1.64
6	Plasticity [Needle penetration at 25°C, with density (1.10 ± 0.05) g/cm³]	mm	4.4 ÷ 9.5
7	Work potential using the pendulum impact method (compared to the explosive energy of TNT), not less than	%	116
8	Sensitivity by Cast method, not more than	%	52
9	Detonation velocity at density of (1.45 ± 0.01) g/cm³, not less than	m/s	7100
10	Lead column compression strength [weight (25 ± 0.01) g, at a density of (1.45 ± 0.01) g/cm³], not less than	mm	20
11	Thermal stability at 100°C for 40 hours, not more than	cm³/g	1.0

RDX TECHNICAL DATA SHEET

No.	Technical Specification	Range Requirements
1	Outer appearance	Small crystalline form, odorless, with no impurities White, visible
2	Melting Point	Minimum 200 ºC
3	Acidity (as HNO₃)	Maximum 0.05%
4	Insoluble Particles Remaining on U.S. Standard Sieve No. 60	Maximum 5 particles
5	Total Content of Insoluble Impurities in Aceton	Maximum 0.05%
6	Total Content of Insoluble Inorganic Substances	Maximum 0.03%
7	Impact Sensitivity (Kast Method)	Maximum 84%
	Particle Size Distribution: Standard Distribution
	Passing through U.S. Standard Sieve No. 20	95–100%
	Passing through U.S. Standard Sieve No. 50	70–100%
	Passing through U.S. Standard Sieve No. 100	20–90%

COMP B EXPLOSIVE TECHNICAL DATA SHEET

1. Technical specification of Hexolite explosive TNHH-TH40 particle and flake

No	Criteria	Requirements
1	Outer appearance	Solid, particle. Yellow/brown, no impurities visible to the unaided eye.
2	Ratio TNT/RDX/WAX, %	39,5 ± 2,3 / 59,5 ± 2,0 / 1,0 ± 0,3
3	Particle size
–	The passing rate through a 4 mesh sieve (hole 4.75 mm), %, not less than	98
–	The passing rate through a 40 mesh sieve (hole 0.0425 mm), %, not greater than	8
4	Melting temperature, °C	80 ± 1
5	Loose bulk density, g/cm³, not less than	0.9
6	Volatile substance content, %, not greater than	0.2
7	Ash content, %, not greater than	0.1
8	The work-generating capacity of the pendulum, compared to TNT, %, not less than	120
9	Detonation velocity (at a density of 1.65 g/cm³), m/s	8,500 ± 400

2. Technical specifications of Hexolite explosive TNHH-TH40 cast charge

No	Criteria	Requirements
1	Outer appearance	Cylindrical explosive charge cast in a 0.5 mm thick paper tube. 1st type: 175 gram, Diameter Ø36 ± 1 mm 2nd type: 400 gram, Diameter Ø54 ± 1 mm
2	Ratio TNT/RDX/WAX, %	39,5 ± 2,3 / 59,5 ± 2,0 / 1,0 ± 0,3
3	Melting temperature, °C	80 ± 1
4	Volatile substance content, %, not greater than	0.2
5	Ash content, %, not greater than	0.1
6	The work-generating capacity of the pendulum, compared to TNT, %, not less than	120
7	Detonation velocity (at a density of 1.65 g/cm³), m/s	8,050 ± 400

HMX TECHNICAL DATA SHEET

1. Appearance and dimension

No.	Technical Specification	Range Requirements
1	Outer appearance	Crystal, uniform small particles
2	Color	White
3	Particle size	The passing rate through a 48mesh sieve (48 holes/cm²) is 100%.

2. Physicochemical properties and technical explosive performance of HMX explosive

No	Criteria	Unit	Requirement	Note
1	Melting temperature	°C	≥ 270
2	Acidity (calculated as acetic acid)	%	≤ 0.05
3	Insoluble substances in acetone	%	≤ 0.05
4	Impact sensitivity	%	84 ÷ 96
5	Work capacity	% TNT	≥ 140
6	Detonation velocity (at a density of 1.25 g/cm³)	m/s	≥ 6,700
7	Moisture content (%)	%	≤ 0.1

Browse Our Full Product Line

Discover the right solution tailored to your needs, our experts are here to help every step of the way.